17 Package & Envelope Detection
The package and envelope detection feature allows you to create a bounding box within the camera’s field-of-view to notify
you of package/envelope deliveries or pick-ups. This feature is used to detect and record mail, boxes, a courier, or a mail
truck. Upon detection, the camera begins recording and will have an exact update on the event.
Package and envelope detection is compatible with certain Lorex IP cameras. For a complete list of compatible cameras, navigate
to your recorder series at
lorex.com/compatibility
.
17.1 Ensuring Package & Envelope Detection Accuracy
The following are important camera installation notes to ensure accurate package and envelope detection. For full camera mounting
instructions, see your camera’s documentation at
lorex.com
.
Angle
|
Height
|
Minimum Distance
|
Maximum Distance
|
15°
|
8.2–11.5ft (2.5 — 3.5m)
|
6.8ft (2.1m)
|
9.1ft (2.8m)
|
The image below is a good example of camera placement, angle, and height for your camera to detect packages/envelopes. This
view captures the path leading up to the door and the door stoop, where packages/envelopes are typically dropped-off. Note
that there are no obstructions between the camera and the bounding box; monitoring a simple environment with a clear view
ensures accurate detection and minimizes false alerts.
17.2 Enable Package & Envelope Detection in Smart Plan
For certain Lorex IP cameras, the package and envelope detection feature cannot be used simultaneously with other smart plans
and is disabled by default. If a Smart Plan is not enabled properly on your camera, the Package/Envelope Detection feature will not work. Please make sure to enable the Package/Envelope feature before continuing.
To enable package and envelope detection in smart plan settings:
-
From the Live View display, right-click to open the Quick Menu, then click Main Menu.
-
Click Events, then Event Settings. Click the Smart Plan tab from the side panel.
-
Select a channel with a compatible camera you would like to configure package and envelope detection.
-
Select the Package/Envelope Detection feature icon.
|
Note
|
If your Lorex IP camera cannot use the package and envelope detection simultaneously with other smart plans, you will need
to disable all other smart plans. When a smart feature icon is enabled, the icon appears blue. Click the blue smart feature
icon again to disable it. When a feature is disabled, the icon appears white.
|
-
Click Apply to save changes.
17.3 Configuring Package & Envelope Detection
The system allows you to define an area and set a period to detect packages/envelopes that are either left behind or missing.
Select channels that you want to enable package/envelope detection on and adjust preferences.
To configure package and envelope detection:
-
From the Live View display, right-click to open the Quick Menu, then click Main Menu.
-
Click Events, then Event Settings. Click the Package/Envelope Detection tab from the side panel.
-
Select a channel with a compatible camera you would like to configure package/envelope detection.
-
Check to enable the package/envelope detection rules that you want to use.
-
Set a name for the rule by double-clicking the mouse over the Name of the rule.
-
Select between Package Left Behind or Package Missing detection types.
|
Note
|
The first two package/envelope detection rules were added by default. The detection type for the two default rules cannot
change and the areas can only be enabled or disabled. All details from rules added after can be changed or deleted.
|
-
Click the Draw icon
and customize the active area for package/envelope detection:
-
To draw, click-and-drag the corners of the yellow box to resize the area. For most accurate results, set an area where objects
of interest will move within the bounding box as well as into/out of.
-
Under Min Duration, type in the number of seconds before the device triggers an event.
-
Click OK when finished.
-
Click the trigger modifying icon
to adjust how the system will react to package/envelope detection.
-
Click Set next to Schedule to choose which days and times of the week to enable package/envelope detection:
-
Click or click-and-drag along each of the red timelines to quickly add or remove time from each day’s schedule in 30–minute
segments.
-
Click
beside 2 or more days to link schedules (
). This allows you to quickly change multiple schedules at once.
-
To make fine adjustments to a schedule, click
. This will allow you to set exact start and end times for a schedule.
-
Click OK when finished.
-
Choose how the system will react to package/envelope detection:
-
Record Channel: Select the channels that will record when a package or envelope is left behind or missing on the selected channel. Set the
length of recording following a package/envelope detection event in the Post_REC field.
-
Send Email: Check to enable email alerts. You must configure email alerts before you will be able to receive them (see 19.6.3 Configuring
Email Alerts, page 90).
-
PTZ Activation: Set connected PTZ cameras to start a tour, pattern, or go to a preset location.
-
Sequence: Sequence mode will begin. Select the numbered tiles next to this option to include the corresponding channels in the sequence.
-
Buzzer: Check to enable the system buzzer.
-
Camera Light: Check to enable warning light. Click Set to change the warning light mode to Strobe or choose how long the warning light will stay on following a package/envelope detection event.
-
Camera Audio: Check to enable voice prompts. Click Set to select a pre-recorded voice message or alarm sound. Choose how many times the prompt will play following a package/envelope
detection event.
-
Smart Light: Check to enable Smart Security Lighting™. Click Set to select a custom color or choose how long the light will stay on following a package/envelope detection event.
Click on the red color box to open the custom color settings.
-
Click OK, click OK again.
-
Click Apply to save changes.
-
Click Add to create additional active areas for smart motion detection on the selected channel.
17.4 Searching for Package & Envelope Detection (Smart Search)
Search for package/envelope events on a specific channel or the entire system. You can also choose to back up events (USB
flash drive required – not included).
To perform a Smart Search:
-
From the Live View display, right-click to open the Quick Menu, then click Smart Search.
-
Click the Package/Envelope Detection tab from the side panel.
-
Select a channel to search for detection events from, or select All.
-
Enter a start and end time for your search.
-
Select the type of package/envelope detection for your search, or select All.
-
Click Search.
-
Events that match your search criteria are displayed. You now have the following options:
-
Click a thumbnail to preview the event. Double-click the preview window to view in full screen.
-
Check thumbnails to perform other actions:
-
Backup: Back up events.
-
Lock: Lock events.
-
Add Book Mark: Bookmark events.