From live view, press once to open the system information screen.
Press and hold for 3 seconds to activate the warning lights and sirens on all connected deterrence cameras.
LED Indicators:
HDD: Glows to indicate hard drive is operating properly. Turns off when there is a hard drive error.
NET: Glows to indicate the recorder is connected to the Internet for remote access and automatic firmware updates. Turns off when
there is no Internet access.
REC: Glows to indicate that the system is currently recording.
PWR: Glows to indicate the system is on.
USB Port: Connect a USB mouse (included) to control the system, or a USB flash drive (not included) for data backup or manual firmware
updates.
Power Button: Press and hold to turn the system on or shut down.
Note
The power switch on the back of the unit must be turned on to use the front panel power button.
3.2 Back Panel
Power Input: Connect the included AC power cable.
Power Switch: Press to power the system on / off.
PoE Video Inputs: Connect Lorex Wired IP cameras to the system. For a full list of compatible cameras, visit lorex.com/compatibility.