HDD: Glows to indicate hard disk drive is operating properly. Turns off when there is a hard disk drive error.
NET: Glows to indicate the recorder is connected to the Internet for remote access and automatic firmware updates. Turns off when
there is no Internet access.
Channel Indicators: Glow when camera is connected to the corresponding channel.
Navigational Buttons:
Center Button: From live view, press once to open the System Information screen. In menus, press to confirm menu options.
Directional Buttons: Press to move cursor in menus. In live view, press up to change split screen layout; press left / right to select channels
when single-channel mode is selected.
Power Button: Press and hold to power off the system (system password required). Press to power the system back on.
Playback Buttons:
Slow: Press to slow playback / decrease playback speed.
Fast: Press to speed up playback / increase playback speed.
Play Backwards: Press to play video backwards / pause video.
Play: Press to play video / pause video.
shift: During text input, press to switch input types.
rec: Press to open manual recording controls.
fn: Performs special functions in some menus.
esc: In menus, press to go back / exit menus. In playback, press to return to live view.
Note
To activate deterrence features manually:
Press and hold for 5 seconds. Warning lights and sirens will be activated for all connected deterrence cameras. The camera
warning light and siren will automatically switch off after 10 seconds.
USB Port: Connect a USB mouse (included) to control the system, or a USB flash drive (not included) for data backup or manual firmware
updates.
3.2 Back Panel
Power Input: Connect the included AC power cable.
Power Switch: Press to power the system on / off.
PoE Video Inputs: Connect Lorex IP cameras to the system. For a full list of compatible cameras, visit lorex.com/compatibility.